New design 2 phase stepper motor driver 4A128 subdivision FMD2740C Stepper motor driver FMD2740C
Characteristic
1¡¢The new bipolar constant current chopper technology
2¡¢With the function of automatic flow
3¡¢The input pulse frequency is up to 15KHZ
4¡¢Support 8 subdivision selections£º2¡¢1/8¡¢1/16¡¢1/32¡¢1/64¡¢1/128¡¢1/10¡¢1/20
5¡¢With the current of 0.5~4A, 8 gears speed adjustable function
6¡¢Beautiful Shell, anodizing sandblasting, laser printing
Drive serial number recognition produced by our company are as follows£ºF-Fastercnc£»MD-Microstep Driver£»2-2 phase£»7-128 subdivision. 40-max current is 4.0A, C-version C£»
The new route optimization, to ensure stable operation, and no noise.
![](https://ae01.alicdn.com/kf/Hbf65fb920f494524ac79dee3c0fa3882G.jpg)
![](https://ae01.alicdn.com/kf/H7838b1070923481b9abfed8a7dcb7729q.jpg)
![](https://ae01.alicdn.com/kf/Hb00cc738bde04623af248b28d3a13adcd.jpg)
![](https://ae01.alicdn.com/kf/He76f457c5fc54226abc9208c6731526f6.jpg)
![](https://ae01.alicdn.com/kf/H248bca59fd8d4b7a816881203a308a29B.jpg)
microstep driver DM542 for nema 23 motor, M542/2M542 stepper driver, DM542 stepper drivers
Specifications:
The driver uses discrete components structure, as long as no over voltage and wiring is right, please rest assured that two-phase 4-wire, 6-wire, 8-wire can be used. 57 series 4.5A or less (including 4.5A) two-phase four-wire, six-wire, eight-wire stepper motor also can be used
Feature:
20KHz chopping frequency
Optical isolation signal input
Output current DIP switch is adjustable
Bipolar constant current chopping method
High segmentation: 2,4,8,16,32,64,128,256. 5,10,25,50,125,200
TTL input signal compatible,while accepting differential signal input
Specifications:
Power supply:DC 24-60 (V)
Current maximum:4.5A
Output phase current:1.5A-4.5A
Logic input current:10-20mA
Operating temperature:-15¡É?+45¡É
Size:11.7*8.5cm/4.61*3.35inch
Note:
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Contents:
1 x DM542 stepper motor driver
![](https://ae01.alicdn.com/kf/H09cf3d6e537247aab3aa13b961d03a68S.jpg)
![](https://ae01.alicdn.com/kf/H5daff7eef13241c98907eb7ea4900517c.jpg)
![](https://ae01.alicdn.com/kf/Hbaed1f21f84042d4afc022b6e8c50e6dj.jpg)
![](https://ae01.alicdn.com/kf/H300668fdc08e4e699302456ea6385ce9e.jpg)
![](https://ae01.alicdn.com/kf/H7260258829aa44598cffcd6fbd81e9b5X.jpg)
Stepper Motor Driver Controller TB6600 0.2-5A CNC Engraving Machine HY-DIV268N-5A Stepper Motor 12 ~ 48V
Two-phase hybrid stepping motor dynamic voltage 12 to 48V, the current is less than 5A outer diameter of 35 to 86 mm. This drive using the drive`s current loop subdivision control, the motor torque ripple is very small, low-speed running is very smooth, almost no vibration and noise. High-speed torque is much higher than other two-phase drive, high positioning accuracy. Widely used in the engraving machine, CNC machine tools, packaging machinery and other high resolution requirements on the device.
The main features
- average current control, two-phase sinusoidal current drive output
- DC 12 ~ 48V power supply, the internal integration of 12V and 5V regulator
- optically isolated signal input / output
- overvoltage, undervoltage, overcurrent, and white short-circuit protection
- The input current of 1 to 5 amps, select the drive a stepper motor.
- Output current of 0.2A ~ 5A
- Temperature Operating Temperature -10 to 45 C; Storage temperature -40 C to 70 C
- Humidity not condensing, not drops
- Gas prohibit combustible gas and conductive dust
- Weight 200 grams
Control signal interface
- Figure 1 is a wiring schematic of the drive
- 1, the definition of control signals
PUL +: step pulse signal is input side or the positive pulse signal input positive terminal
PUL-: the negative input of the negative input pulse signal or a positive pulse signal
DIR +: stepping direction signal input to the positive terminal or negative pulse signal input to the positive terminal
DIR -: stepping direction signal input of the negative side or reverse step pulse signal input negative terminal
EN +: offline can reset signal input side is
EN-: offline can reset signal input negative terminal
Offline enable signal is active, reset drive failure to prohibit any pulse, the output of the drive
Power component is turned off, the motor holding torque.
- Control signal connections
- PC control signal can be high, also can be low effective. When active high, the control signal
- The negative side together as a signal to active low, positive side of all control signals together as a signal common.
- For example, open-collector and PNP output interface circuit diagram is as follows:
- Note: the VCC is 5V, R short
- VCC value of 12V, R 1K, more than 1/8W resistor;
- VCC value of 24V, R 2K, more than 1/8W resistor;
- Set the motor per revolution steps
The drive to set the number of steps per motor revolution is 200 (whole step), 400 (2 segments), 1600 (8 segments), 3200 steps (16 segments).
The user can drive the front panel DIP switch SW3 is SW4 bit of the drive to set the number of steps (such as Table 1)
Table 1
- Set the output phase current
- To drive torque stepper motor, the user can drive panel DIP switch
- SW1, SW2 is to set the drive output phase current (RMS) unit amperes, the switch position
- Corresponding to the output current, output current value corresponding different types of drive. Concrete are shown in Table 2.
- Output Current (A
Table 2
Current setting
- The semi-flow function is a step pulse 200ms, the driver output current is automatically reduced to the rated output current50%, used to prevent motor heating.
Fourth, the power interface
- 1, DC +, DC-: to connect the drive power
- DC +: DC power level, power supply voltage DC 12 to 48V. The maximum current is 5A. The
DC-: DC power supply negative level.
2, A + A-B + B-: to connect the two-phase hybrid stepping motor
Drive and two-phase hybrid stepper motor`s connection with the four-wire system, the motor windings in parallel and series connection, and connection method, high-speed performance, but the drive current is large (for motor winding current of 1.73 times), Connected in series when the drive current is equal to the motor winding current.
Five, the installation
- Around to have 20mm of space, can not be placed next to the other heating equipment, to avoid dust, oil mist,
Corrosive gases, high humidity is too big and strong vibration. +
Figure 3.
Six fault diagnosis
1, the status light indicates
RUN: green light in the normal work.
ERR: red light, power, light, power indicator
![](https://ae01.alicdn.com/kf/Hf883ba9a4b7e4175906607dfbf832aa6l.jpg)
![](https://ae01.alicdn.com/kf/H8a0deaf7d94a4abd92e7fa3e678533f0r.jpg)
TB6560 3A-1 stepper motor driver stepper motor driver board single-axis current controller 10 files
Specifications:
Rated voltage: DC 12V-24V
Maximum current: 3.5A
Current adjustable (Current Settings): 0.5A, 1A, 1.5A, 1.8A, 2A.2.5A, 3.5A
Adjustable subdivision (Excitation Mode): 1,2,8,16
Adjustable attenuation (Decay Mode):
0% ---- No decay mode
25% ---- Slow decay mode
50% ---- Normal mode
100% ---- Fast decay mode
----- By decay mode adjustment can match different motor impedance, thereby eliminating the noise and movement motor stepper motor is locked in the jitter.
Automatic semi-flow settings (Torque Settings):
20% ---- no pulse current is reduced when the normal operating current 20%
50% ---- no pulse current is reduced when the normal operating current 50%
75% ---- no pulse current is reduced when the normal operating current 75%
100% ---- no pulse when the current drops to normal operating current 100%
Features:
1. very easy to use, no instructions, all use are marked on the board
2. Absolute using the new chips imported Toshiba TB6560
3. With large heat sink to ensure good heat dissipation
4. Input signal high-speed optocoupler isolation, guarantee not losing steps
5. Semi-flow mode adjustable, semi-flow current adjustable, not the general design on the market, with a variety of semi-flow model and semi-flow current setting function
6. decay mode adjustable, no noise can be done when the motor locked for all
7. The ultra-small size, overall dimensions: 62mm * 75mm, installation of four mechanical positioning hole size: 65mm * 55, hole size is ¥Õ3mm
8. The form of stud connectors and plug type optiona
![](https://ae01.alicdn.com/kf/H598eeca070d9449481851e126946073co.jpg)
![](https://ae01.alicdn.com/kf/H421b2c95a5c54e89827102e4231b4af5t.jpg)
![](https://ae01.alicdn.com/kf/H7bd3a3465a1347f3a5dcd50e9e736bc31.jpg)
cnc stepper motor driver kit 4.5A TB6600-1 stepper motor driver board for CNC machine
Specifications:
1. Working voltage DC 10V-45V (suggest to use DC32V switching power supply)
2. Use high-speed optical coupling
3. Applicated to 42 / 57 /86 two phase / four phase / four wire / six wire stepper motor
4. Automatic half flow function
5. Dimension: 50 * 82 * 35mm
Features:
1) Operating voltage DC 10V-45V. DC32V switching power supply is recommended.
2) high-speed optical coupling 6N137, ensure high speed without losing step.
3) Toshiba`s new high current, high voltage TB6600HG new original chip, there are low-pressure shut-off, overheating parking and over-current protection circuit, short-circuit protection and increased compared to TB6560.
4) Rated maximum output reached: ± 4.5A.
5) for 4.2A 42,57,86 within the two-phase / four-phase / four-wire / six-wire stepper motor.
6) Automatic half current function.
7) Subdivision: full step, half step, 1/4-step, step 1/8, 1/16-step, up to 16 segments.
8) Volume: Width Length 82 * 50 * high 35 (MM)
![](https://ae01.alicdn.com/kf/H49ee04f604f642eca8894e05d57ce29cx.jpg)
![](https://ae01.alicdn.com/kf/Hca8ed8bd9b34404a96f480960942630eN.jpg)
![](https://ae01.alicdn.com/kf/Hf2be061b94ed44828e4e9fa387a73cfeS.jpg)
42/57/86 TB6600 stepper motor driver 32 segments upgraded version 4.0A 42VDC
Specifications:
This drive is an upgraded version of the TB6600, the breakdown of heightening to 32 segments, for high segmentation purposes. Applicable stepper motor: 42,57,86 type of 2-phase 4-phase (4-wire 6 wire line 8)
Features:
1, 9V-42V DC power supply;
2, H-bridge bipolar constant-phase flow-driven;
3, the maximum output current of 4.0A eight optional;
4, up to 32 segments of six kinds of sub-modes available;
5, the input signal is high-speed optical isolation;
6, standard common anode single pulse interface;
7, offline hold function;
8, semi-enclosed chassis can accommodate more demanding environment;
9, provide energy semiautomatic current lock function;
10, built-in thermal protection and overcurrent protection.
![](https://ae01.alicdn.com/kf/H927e78729bf9406d813d0b143c156995B.jpg)
![](https://ae01.alicdn.com/kf/H0a95b2e6063741bd8fc949396998add4U.jpg)
![](https://ae01.alicdn.com/kf/H4ff615a8a0b34512abf5d0c5d9d1bff5c.jpg)