Description:
100% brand new and high quality!
The electronic mirror uses the principle of light reflection to provide a light source and soft wind to prevent the lens from fogging and assist the doctor in intraoral photography.
Use high-quality LED lights to increase brightness without ghosting and clear images;
Breathing in the breeze can effectively prevent the mirror from fogging when people breathe;
There are four types of stainless steel reflectors to meet different needs.
Project Type: Teeth Whitening
Model: Dental mirror
Material: Stainless steel
Color: as shown
Specifications: Anti-fog mirror handle, L maxillofacial mirror, M maxillofacial mirror, buccal mirror, tongue depressor
Size:
Anti-fog mirror handle: about 12.3 (length) *5.7 (upper width) *4.3 (lower width) cm
Maxillofacial mirror L: about 14 (length) * 7 (upper width) * 3.6 (lower width) cm
M maxillofacial mirror: about 13.6 (length) * 5.3 (upper width) * 3.7 (lower width) cm
Buccal mirror: about 14.5 (length) * 4.8 (upper width) * 3.6 (lower width) cm
Tongue depressor: about 15 (length) * 4 (upper width) * 3.7 (lower width) cm
Battery (handle): 1000mAh/3.7V
Input (handle): 5.0V l.0A
Output (handle): 13W Max
Charging:
Take out the white power cord at the bottom of the box, insert the plug into the rear socket of the machine, and plug the other end into any output 5V/1A USB socket and connect it to the power source. When the battery is charging, the green charging indicator light is on: when the battery is full, the indicator light is off.
Note: When the lights are flickering, the lighting is not bright enough, the fans are turned off instantly, and the air supply time is relatively short, please charge in time!
Electronic defogging mirror:
After the light is reflected, the mobile phone or DV can take pictures and record, which improves the convenience of doctors. The lens can be sterilized by high temperature and high pressure.
Note: This camera and lens do not have camera function
Product use:
1. Fan button, press once to turn on the fan, press again to turn off the fan.
2. The fan and lighting button, press the fan and lighting to turn on at the same time, press the fan and lighting to turn off at the same time.
3. When in use, insert the end of the matching lens into the notch on the back of the device, press the left (fan) button, and the device will send out soft wind to remove the mirror fog. If the light source is insufficient, press the button on the right (fan and lighting) to send out soft wind and light source at the same time. After use, turn off the button and the device stops working.
4. When there is no operation, the lights and fans will stop working after 3 minutes.
5. When you stop using it, pull out the lens horizontally and clean and disinfect according to the instructions.
clean and disinfect:
1. After each use, all parts that have been in contact with the source of infection should be wiped clean with towels soaked in clear venom or cleaning fluid (no bacteria, fungi and aldehydes).
2. Cleaning with chemical reagents may cause damage to the instrument.
3. All lenses must be autoclaved (134°C/0.22MPa) before each treatment.
The package includes:
1pcs x stainless steel mirror or 1pcs x handle or 1set
(According to your choice of order)
If you choose mirror, the handle is not include.
Note:
1. The actual color of the item may be slightly different from the picture displayed on the website.
Caused by many factors, such as display brightness and light brightness.
2. Please allow 1-5mm hand measurement error.